PPTC自恢复保险丝 JK60系列规格书 - 图文 

JK60 Series Surface Mount PTC Devices

Performance SpecificationMaximum Time

Model

Vmax

Imax

Ihold

Itrip

Pd Typ.

(Vdc)

JK60-010 JK60-017 JK60-020 JK60-025 JK60-030 JK60-040 JK60-050 JK60-065 JK60-075 JK60-090 JK60-110 JK60-135 JK60-160 JK60-185 JK60-250 JK60-300 JK60-375

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

(A) 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

(A) 0.10 0.17 0.20 0.25 0.30 0.40 0.50 0.65 0.75 0.90 1.10 1.35 1.60 1.85 2.50 3.00 3.75

(A) 0.20 0.34 0.40 0.50 0.60 0.80 1.00 1.30 1.50 1.80 2.20 2.70 3.20 3.70 5.00 6.00 7.50

(W) 0.38 0.48 0.41 0.45 0.49 0.56 0.77 0.88 0.92 0.99 1.50 1.70 1.90 2.10 2.50 2.80 3.20

To Trip Current (A) 0.50 0.85 1.00 1.25 1.50 2.00 2.50 3.25 3.75 4.50 5.50 6.75 8.00 9.25 12.50 15.00 18.75

Time(Sec)4.0 3.0 2.2 2.5 3.0 3.8 4.0 5.3 6.3 7.2 8.2 9.6 11.4 12.6 15.6 19.8 24.0

Rimin

Resistance Rimax

R1max

(?)

2.50 2.50 1.25 0.65 0.45 0.40 0.35 0.25 0.20 0.15 0.13 0.10 0.07 0.06 0.04 0.03 0.02

(?)

4.50 5.21 2.75 1.95 1.33 0.86 0.77 0.48 0.40 0.31 0.25 0.19 0.14 0.12 0.08 0.06 0.05

(?)

7.50 8.00 4.40 3.00 2.10 1.29 1.17 0.72 0.60 0.47 0.38 0.30 0.22 0.19 0.13 0.10 0.08

V max = Maximum operating voltage device can withstand without damage at rated current (Imax). I max = Maximum fault current device can withstand without damage at rated voltage (V max). I hold = Hold Current. Maximum current device will not trip in 25°C still air.

I trip = Trip Current. Minimum current at which the device will always trip in 25°C still air.

Pd = Power dissipation when device is in the tripped state in 25°C still air environment at rated voltage. Ri min/max = Minimum/Maximum device resistance prior to tripping at 25°C. R1max = Maximum device resistance is measured one hour post reflow.

CAUTION : Operation beyond the specified ratings may result in damage and possible arcing and flame.

Environmental SpecificationsTest

Passive aging Humidity aging Thermal shock Resistance to solvent Vibration

Ambient operating conditions : - 40 °C to +85 °C

Maximum surface temperature of the device in the tripped state is 125 °C

Conditions +85°C, 1000 hrs.

+85°C, 85% R.H. , 168 hours+85°C to -40°C, 20 timesMIL-STD-202,Method 215 MIL-STD-202,Method 201

Resistance change ±5% typical ±5% typical ±33% typical No change No change

http:// www.jksemi.com 2016-12-01 版次: c

JK60 Series Surface Mount PTC Devices

Agency Approval and Environmental CompliancAgency UL TUV

File Number pendingpending

Regulation

Standard 2002/95/ECEN14582

Thermal Derating CurveDerating Curves for D60 Series180Percentage of Derated Current160140Average Time-Current Curve

Average Time Current Curves0.100A0.170A0.200A0.250A0.300A1000100TIME IN SECON0.400A0.500A0.650A120100806040200-40-200204060801010.750A0.900A1.10A1.35A1.60A1.85A0.12.50A3.00A3.75A0.010.1110100Temperature (°C)CURRENT IN AMPERESIhold Versus TemperatureModel JK60-010 JK60-017 JK60-020 JK60-025 JK60-030 JK60-040 JK60-050 JK60-065 JK60-075 JK60-090 JK60-110 JK60-135 JK60-160 JK60-185 JK60-250 JK60-300 JK60-375

Maximum ambient operating temperature (Tmao) vs. hold current (Ihold)

-40°C0.16 0.26 0.31 0.39 0.47 0.62 0.78 1.01 1.16 1.40 1.71 2.09 2.48 2.87 3.88 4.65 5.81

-20°C0.14 0.23 0.27 0.34 0.41 0.54 0.68 0.88 1.02 1.22 1.50 1.84 2.18 2.52 3.40 4.08 5.10

0°C 0.12 0.20 0.24 0.30 0.36 0.48 0.60 0.77 0.89 1.07 1.31 1.61 1.90 2.20 2.98 3.57 4.46

25°C 0.10 0.17 0.20 0.25 0.30 0.40 0.50 0.65 0.75 0.90 1.10 1.35 1.60 1.85 2.50 3.00 3.75

40°C 0.08 0.14 0.16 0.20 0.24 0.32 0.41 0.53 0.61 0.73 0.89 1.09 1.30 1.50 2.03 2.43 3.04

50°C 0.07 0.12 0.14 0.18 0.22 0.29 0.36 0.47 0.54 0.65 0.79 0.97 1.15 1.33 1.80 2.16 2.70

60°C 0.06 0.11 0.13 0.16 0.19 0.25 0.32 0.41 0.47 0.57 0.69 0.85 1.01 1.17 1.58 1.89 2.36

70°C 0.05 0.09 0.11 0.14 0.16 0.22 0.27 0.35 0.41 0.49 0.59 0.73 0.86 1.00 1.35 1.62 2.03

85°C 0.04 0.07 0.08 0.10 0.12 0.16 0.20 0.26 0.30 0.36 0.44 0.54 0.64 0.74 1.00 1.20 1.50

http:// www.jksemi.com 2016-12-01 版次: c

JK60 Series Surface Mount PTC Devices

Soldering ParametersTP 260 Pre-Heating 1 Minute Min. Soldering 5Sea.MAXGradual Cooling 100 25 TimeWAVE SOLDERING INFORMATIONS

Pre-Heating Zone Soldering Zone Cooling Zone

Max. ramping rate should not exceed 4℃/Sec. Max. solder temperature should not exceed 260℃ Cooling by natural convection in air.

◎Specifications are subject to change without notice.

Physical Dimensions(mm.)AAE C JK 135 60-JK= JKSEMI mark 60 = Radial type 60 V 135 = 1.35A hold current

B B

D

DC Model JK60-010 JK60-017 JK60-020 JK60-025 JK60-030 JK60-040 JK60-050 JK60-065 JK60-075 JK60-090 JK60-110 JK60-135 JK60-160 JK60-185 JK60-250 JK60-300 JK60-375

A Max. 7.4/0.29 7.4/0.29 7.4/0.29 7.4/0.29 7.4/0.29 7.6/0.30 7.9/0.31 9.7/0.38 10.4/0.41 11.7/0.46 13.0/0.51 14.5/0.57 16.3/0.64 17.8/0.70 21.3/0.84 24.9/0.98 28.5/1.12

B Max. 12.7/0.50 12.7/0.50 12.7/0.48 12.7/0.50 13.0/0.51 13.5/0.53 13.7/0.54 14.5/0.57 15.2/0.60 15.8/0.62 18.0/0.71 19.6/0.77 21.3/0.84 22.9/0.90 26.4/1.04 30.0/1.18 33.5/1.32

C Typ. 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 10.2/0.40 10.2/0.40 10.2/0.40

D Min. 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3

E Max. 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12 3.1/0.12

F Max. 1.0/0.04 1.7/0.07 1.0/0.04 1.0/0.04 1.0/0.04 1.2/0.05 1.2/0.05 1.5/0.06 1.5/0.06 1.5/0.06 1.2/0.05 1.2/0.05 1.5/0.06 1.5/0.06 1.7/0.07 2.0/0.08 2.0/0.08

Lead Style Kink Kink Kink Kink Kink Kink Kink Kink Kink Kink Straight Straight Straight Straight Straight Straight Straight

C F

http:// www.jksemi.com 2016-12-01 版次: c

JK60 Series Surface Mount PTC Devices

PHYSICAL SPECIFICATIONS :

Materials : JK60-010: Tin-plated nickel-copper alloy, 0.205mm2 (24AWG), Φ0.51mm(0.020 in).

JK60-017 ~ 040: Tin-plated copper-clad steel, 0.205mm2 (24AWG), Φ0.51mm(0.020 in).

JK60-050 ~ 090: Tin-plated copper , 0.205mm2 (24AWG), Φ0.51mm(0.020 in). JK60-110 ~ 375: Tin-plated copper , 0.52mm2 (20AWG), Φ0.81mm(0.032 in). Lead Solderability : MIL-STD-202, Method 208E

Packaging QuantityOrder information

60 Radial type 60 V

185 Hold Current (A)

S=Straight leads

Tape & Reel packaging per EIA468-B standard.

K or S K=Kink leads

R or U R= Tape & Reel U= Bulk packaged

Packing

Model

JK60-010 ~ JK60-090 JK60-017

JK60-110 ~ JK60-185 JK60-250 ~ JK60-375

Reel Q'ty 3000 2500 1500 -

Bag Q'ty 500 500 500 500

Cross ReferenceCross Reference

Darong

JK60-010 JK60-017 JK60-020 JK60-025 JK60-030 JK60-040 JK60-050 JK60-065 JK60-075 JK60-090 JK60-110 JK60-135 JK60-160 JK60-185 JK60-250 JK60-300 JK60-375

Tyco / Raychem

RXEF010 RXEF017 RXEF020 RXEF025 RXEF030 RXEF040 RXEF050 RXEF065 RXEF075 RXEF090 RXEF110 RXEF135 RXEF160 RXEF185 RXEF250 RXEF300 RXEF375

Bourns / Multifuse?

MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-RX110 MF-RX135 MF-RX160 MF-RX185 MF-RX250 MF-RX300 MF-RX375

Polytronics / EVERFUSE?

RLD60P010UF RLD60P017UF RLD60P020UF RLD60P025UF RLD60P030UF RLD60P040UF RLD60P050UF RLD60P065UF RLD60P075UF RLD60P090UF RLD60P110UF RLD60P135UF RLD60P160UF RLD60P185UF RLD60P250UF RLD60P300UF RLD60P375UF

SEA-LAND

R60-010 R60-017 R60-020 R60-025 R60-030 R60-040 R60-050 R60-065 R60-075 R60-090 R60-110 R60-135 R60-160 R60-185 R60-250 R60-300 R60-375

“Raychem” is a registered trademark of Tyco Electronics. “Multifuse” is a registered trademark of bourns,Inc.

“EVERFUSE” is a registered trademark of Polytronics Technology Corp. “SEA-LAND” is a registered trademark of Sea-Land electronic corp.

http:// www.jksemi.com 2016-12-01 版次: c



联系客服:cand57il.com