PPTC自恢复保险丝 JK30系列规格书 - 图文 

JK30 Series Surface Mount PTC DevicesPerformance SpecificationMaximum Time

Model

Vmax

Imax

Ihold

Itrip

Pd Typ.

(Vdc)

JK30-030 JK30-040 JK30-050 JK30-065 JK30-075 JK30-090 JK30-110 JK30-135 JK30-160 JK30-185 JK30-250 JK30-300 JK30-400 JK30-500 JK30-600 JK30-700 JK30-800 JK30-900

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

(A) 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

(A) 0.30 0.40 0.50 0.65 0.75 0.90 1.10 1.35 1.60 1.85 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00

(A) 0.60 0.80 1.00 1.30 1.50 1.80 2.20 2.70 3.20 3.70 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00

(W) 0.44 0.45 0.46 0.47 0.48 0.6 0.7 0.8 0.9 1.0 1.2 2.0 2.5 3.0 3.5 3.8 4.0 4.2

To Trip Current (A) 8.00 8.00 8.00 8.00 8.0 4.50 5.50 6.75 8.00 9.25 12.5 15.0 20.0 25.0 30.0 35.0 40.0 40.0

Time(Sec)0.3 0.3 0.3 0.4 0.4 5.9 6.6 7.3 8.0 8.7 10.3 10.8 12.7 14.5 16.0 17.5 18.8 20.0

Rimin

Resistance Rimax

R1max

(?)

0.370 0.250 0.150 0.120 0.100 0.070 0.050 0.040 0.030 0.030 0.020 0.020 0.010 0.010 0.005 0.005 0.005 0.005

(?)

0.720 0.430 0.400 0.300 0.250 0.145 0.120 0.085 0.070 0.060 0.040 0.050 0.030 0.030 0.020 0.020 0.020 0.010

(?)

1.080 0.645 0.600 0.450 0.375 0.220 0.170 0.130 0.110 0.090 0.070 0.080 0.050 0.050 0.040 0.030 0.020 0.020

V max = Maximum operating voltage device can withstand without damage at rated current (Imax). I max = Maximum fault current device can withstand without damage at rated voltage (V max). I hold = Hold Current. Maximum current device will not trip in 25°C still air.

I trip = Trip Current. Minimum current at which the device will always trip in 25°C still air.

Pd = Power dissipation when device is in the tripped state in 25°C still air environment at rated voltage. Ri min/max = Minimum/Maximum device resistance prior to tripping at 25°C. R1max = Maximum device resistance is measured one hour post reflow.

CAUTION : Operation beyond the specified ratings may result in damage and possible arcing and flame.

Environmental SpecificationsTest

Passive aging Humidity aging Thermal shock Resistance to solvent Vibration

Ambient operating conditions : - 40 °C to +85 °C

Maximum surface temperature of the device in the tripped state is 125 °C

Conditions +85°C, 1000 hrs.

+85°C, 85% R.H. , 168 hours+85°C to -40°C, 20 timesMIL-STD-202,Method 215 MIL-STD-202,Method 201

Resistance change ±5% typical ±5% typical ±33% typical No change No change

http:// www.jksemi.com 2016-12-01 版次: c

JK30 Series Surface Mount PTC DevicesAgency Approval and Environmental CompliancAgency UL TUV

File Number pendingpending

Regulation

Standard 2002/95/ECEN14582

Thermal Derating CurveDerating Curves for D30 SeriesAverage Time-Current Curve

Average Time Current Curves180Percentage of Derated Current160140120100806040200-40-20020406080Temperature (°C)10000.90A 1.10A 1.35A 1.60A 1.85A 2.50A 3.00A 100TIME IN SECOND104.00A 5.00A 6.00A 7.00A 8.00A 9.00A 0.75A0.65A0.50A0.40A10.10.01110CURRENT IN AMPERES1000.30AIhold Versus TemperatureModel JK30-030 JK30-040 JK30-050 JK30-065 JK30-075 JK30-090 JK30-110 JK30-135 JK30-160 JK30-185 JK30-250 JK30-300 JK30-400 JK30-500 JK30-600 JK30-700 JK30-800 JK30-900

Maximum ambient operating temperature (Tmao) vs. hold current (Ihold)

-40°C0.44 0.58 0.73 0.95 0.00 1.31 1.60 1.96 2.32 2.68 3.63 4.35 5.80 7.25 8.70 10.15 11.60 13.05

-20°C0.39 0.52 0.65 0.85 0.00 1.17 1.43 1.76 2.08 2.41 3.25 3.90 5.20 6.50 7.80 9.10 10.40 11.70

0°C 0.35 0.46 0.58 0.75 0.00 1.04 1.27 1.55 1.84 2.13 2.88 3.45 4.60 5.75 6.90 8.05 9.20 10.35

25°C 0.30 0.40 0.50 0.65 0.75 0.90 1.10 1.35 1.60 1.85 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00

40°C 0.25 0.33 0.42 0.54 0.00 0.75 0.91 1.12 1.33 1.54 2.08 2.49 3.32 4.15 4.98 5.81 6.64 7.47

50°C 0.23 0.31 0.38 0.50 0.00 0.69 0.85 1.04 1.23 1.42 1.93 2.31 3.08 3.85 4.62 5.39 6.16 6.93

60°C 0.20 0.27 0.34 0.44 0.00 0.61 0.75 0.92 1.09 1.26 1.70 2.04 2.72 3.40 4.08 4.76 5.44 6.12

70°C 0.18 0.24 0.31 0.40 0.00 0.55 0.67 0.82 0.98 1.13 1.53 1.83 2.44 3.05 3.66 4.27 4.88 5.49

85°C 0.16 0.21 0.26 0.34 0.00 0.47 0.57 0.70 0.83 0.96 1.30 1.56 2.08 2.60 3.12 3.64 4.16 4.68

http:// www.jksemi.com 2016-12-01 版次: c

JK30 Series Surface Mount PTC DevicesSoldering ParametersTP 260 Pre-Heating 1 Minute Min. Soldering 5Sea.MAXGradual Cooling 100 25 TimeWAVE SOLDERING INFORMATIONS Pre-Heating Zone Soldering Zone Cooling Zone Max. ramping rate should not exceed 4℃/Sec. Max. solder temperature should not exceed 260℃ Cooling by natural convection in air. ◎Specifications are subject to change without notice.Physical Dimensions(mm.)A E C B

B

AE JK 30-135

JK = JKSEMI mark

30= Radial type 30 Vrms 135 = 1.35A hold current

F D

C Model JK30-030 JK30-040 JK30-050 JK30-065 JK30-075 JK30-090 JK30-110 JK30-135 JK30-160 JK30-185 JK30-250 JK30-300 JK30-400 JK30-500 JK30-600 JK30-700 JK30-800 JK30-900

A Max. 7.4/0.29 7.4/0.29 7.4/0.29 7.4/0.29 7.4/0.29 7.4/0.29 7.4/0.29 8.9/0.35 8.9/0.35 10.2/0.4011.4/0.4511.4/0.4514.0/0.5514.0/0.5516.5/0.6519.1/0.7521.6/0.8524.1/0.95

B Max. 10.2/0.4 11.4/0.45 11.4/0.45 11.4/0.45 11.4/0.45 12.2/0.48 14.2/0.56 13.5/0.53 15.2/0.60 15.7/0.62 18.3/0.72 17.3/0.68 20.1/0.79 24.9/0.98 24.9/0.98 26.7/1.05 29.2/1.15 29.7/1.17

D

CC Typ. 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 5.1/0.20 10.2/0.40 10.2/0.40 10.2/0.40 10.2/0.40 10.2/0.40

D Min. 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3 7.6/0.3

E Max. 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12 3.0/0.12

F Max. 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 1.2/0.05 2.0/0.08 2.0/0.08 2.0/0.08 2016-12-01 版次: c

Lead Style Straight Straight Straight Straight Straight Kink Kink Kink Kink Kink Kink Straight Straight Straight Straight Straight Straight Straight

http:// www.jksemi.com

JK30 Series Surface Mount PTC Devices PHYSICAL SPECIFICATIONS :

Materials : Leads JK30-030 ~ 250: Tin-platedcopper-cladsteel,0.205mm2(24AWG),Φ0.51mm(0.020in).

JK30-300 ~ 900: Tin-plated copper, 0.52mm2 (20AWG), Φ0.81mm(0.032 in).

Lead Solderability : MIL-STD-202, Method 208E

Packaging Quantity30 Radial type

135 Hold Current (A)

30 V

S=Straight leads

K or S K= Kink leads

R=Tape&reel

U= Bulk packaged R or U

Model

JK30-030 ~ JK30-075 JK30-090 ~ JK30-250 JK30-300 ~ JK30-400 JK30-500 ~ JK30-900

Reel Q'ty

Bag Q'ty 500 500 500 500

- 3000 1500 -

Tape & Reel packaging per EIA468-B standard.

Cross ReferenceCross Reference

Darong

JK30-030 JK30-040 JK30-050 JK30-065 JK30-075 JK30-090 JK30-110 JK30-135 JK30-160 JK30-185 JK30-250 JK30-300 JK30-400 JK30-500 JK30-600 JK30-700 JK30-800 JK30-900

Tyco / Raychem

- - - - - RUEF090 RUEF110 RUEF135 RUEF160 RUEF185 RUEF250 RUEF300 RUEF400 RUEF500 RUEF600 RUEF700 RUEF800 RUEF900

Bourns / Multifuse?

- - - - -

MF-R090-0-009 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900

Polytronics / EVERFUSE?

- - - - -

RLD30P090UF RLD30P110UF RLD30P135UF RLD30P160UF RLD30P185UF RLD30P250UF RLD30P300UF RLD30P400UF RLD30P500UF RLD30P600UF RLD30P700UF RLD30P800UF RLD30P900UF

SEA-LAND

R30-030 R30-040 R30-050 R30-065 R30-075 R30-090 R30-110 R30-135 R30-160 R30-185 R30-250 R30-300 R30-400 R30-500 R30-600 R30-700 R30-800 R30-900

“Raychem” is a registered trademark of Tyco Electronics. “Multifuse” is a registered trademark of bourns,Inc.

“EVERFUSE” is a registered trademark of Polytronics Technology Corp. “SEA-LAND” is a registered trademark of Sea-Land electronic corp.

Website: http://www.jksemi.com

For additional information, please contact your local Sales Representative.

?Copyright 2016, jk semi

is a registered trademark of jk semi All rights are reserved 2016-12-01 版次: c

http:// www.jksemi.com



联系客服:cand57il.com